Discharge Flange : DN 32 – DN 150
Capacity : 500 m³/h
Head : 100 m
Frequency : Three-phase 50 Hz - 60 Hz*
Temperature of Pumped Liquid : From -25 ˚C to+140 ˚C
Maximum Operating Pressure : 10 bar (16 bar)*

PUMP DESIGN FEATURES

• Monoblock centrifugal pumps with horizontal shaft, volute casing, single stage, end suction and closed impeller.
• The main dimensions of the housing comply with EN 733 standards.
• Design according to EU 547/2012 energy rating.
• Suction and discharge flanges according to EN 1092 - 2 / PN 16. Flanges are suitable for EN 1092
• 1 / PN 16 in pumps with steel or stainless steel body material. Pumps could be produced with ANSI / ASME flanges optionally.
• Pumps are used with electric motors of high efficiency class according to IEC structure sizes.
• All impellers are balanced dynamically or statically according to ISO 1940 class 6.3.
• The axial force is balanced with the wheel balancing holes system.
• The direction of rotation is clockwise by the engine.
• Monoblock pumps are smaller and lighter than the same hydraulic centrifugal pumps.
• Optionally, pumps can be manufactured with wear ring and / or shaft bushings.
• The pump shaft is connected to the motor shaft with a plug-in shaft or rigid coupling. The axial and radial forces of the pump have been covered by the motor bearings.

Download
sectional view